Welcome!

Video Authors: Elizabeth White, Yakov Fain, Liz McMillan, Dan Ristic, Jnan Dash

News Feed Item

CPSC Approves Strong Federal Safety Standard for High-Powered Magnet Sets to Protect Children and Teenagers

WASHINGTON, Sept. 25, 2014 /PRNewswire-USNewswire/ -- To protect the safety of consumers, especially young children, tweens, and teenagers, the U.S. Consumer Product Safety Commission voted to approve a new national safety standard for high-powered magnet sets.

http://www.cpsc.gov. " border="0" alt="The U.S. Consumer Product Safety Commission is an independent federal agency created by Congress in 1973 and charged with protecting the American public from unreasonable risks of serious injury or death from more than 15,000 types of consumer products under the agency's jurisdiction. To report a dangerous product or a product-related injury, call the CPSC hotline at 1-800-638-2772, or visit http//:www.cpsc.gov/talk.html. Further recall information is available at http://www.cpsc.gov. " align="middle" src="http://photos.prnewswire.com/prnvar/20030904/USCSCLOGO"/>

High-powered magnet sets are hazardous to young children, who have mouthed and ingested these magnets.  The magnets also pose a serious risk to teens and tweens, who have used them to create mock lip, tongue, and nose piercings. 

Hazardous magnet sets include, on average, approximately 200 magnets, although some sets have up to 1,700 magnets.  If multiple magnets are ingested, the magnets attract each other, pinching or trapping intestines or other digestive tissue between them.  The result can be a serious injury that requires surgery and can lead to lifelong health consequences or death.  High-powered magnet sets were found to be responsible for the death of a 19-month-old girl and, according to CPSC analysis, an estimated 2,900 emergency room-treated injuries between 2009 and 2013.  The Commission concluded that the safety standard is necessary to address the unreasonable risk of injury or death associated with these magnet sets.

Under the new CPSC performance standard, an individual magnet from a magnet set either must be large enough that the magnet does not fit into a CPSC small parts cylinder or the power of the magnetic force must be lower than a specified measure. Certain hazardous magnet sets that were previously in the marketplace had a magnetic force that was 37 times greater than what the new performance standard permits.

The rule applies to high-powered magnet sets and to individual magnets that are marketed or intended for use as part of a magnet set.  Magnets manufactured or imported on or after the effective date of the new standard, which is 180 days after the rule is published in the Federal Register, must meet the new performance standard.  Once the safety standard becomes effective, the manufacture, importation, distribution or sale of high-powered magnet sets that are subject to the federal standard and do not comply will be illegal.   

CPSC urges consumers to stop using those high-powered magnets that will not comply with the new federal standard.

Consumers can also visit CPSC's Magnet Safety Information Center at www.cpsc.gov/magnets for more information, including our "Teen to Teen: Magnet Talk" video and "Magnets Go in Easier Than They Come Out" poster.

The official vote of the Commission was 4-0-1 to approve the final federal safety rule for high-powered magnets.

Photo available at http://www.cpsc.gov/en/Newsroom/News-Releases/2014/CPSC-Approves-Strong-Federal-Safety-Standard-for-High-Powered-Magnet-Sets-to-Protect-Children-and-Teenagers/

The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of injury or death associated with the use of thousands of types of consumer products under the agency's jurisdiction.  Deaths, injuries, and property damage from consumer product incidents cost the nation more than $1 trillion annually. CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical or mechanical hazard. CPSC's work to ensure the safety of consumer products - such as toys, cribs, power tools, cigarette lighters and household chemicals – contributed to a decline in the rate of deaths and injuries associated with consumer products over the past 40 years.

Federal law bars any person from selling products subject to a publicly-announced voluntary recall by a manufacturer or a mandatory recall ordered by the Commission.

To report a dangerous product or a product-related injury go online to www.SaferProducts.gov or call CPSC's Hotline at (800) 638-2772 or teletypewriter at (301) 595-7054 for the hearing impaired. Consumers can obtain news release and recall information at www.cpsc.gov, on Twitter @USCPSC or by subscribing to CPSC's free e-mail newsletters.

Media Contact
Please use the phone numbers below for all media requests.
Phone: (301) 504-7908
Spanish: (301) 504-7800

Logo - http://photos.prnewswire.com/prnh/20030904/USCSCLOGO

SOURCE U.S. Consumer Product Safety Commission

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

@ThingsExpo Stories
SYS-CON Events announced today that Daiya Industry will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Daiya Industry specializes in orthotic support systems and assistive devices with pneumatic artificial muscles in order to contribute to an extended healthy life expectancy. For more information, please visit https://www.daiyak...
SYS-CON Events announced today that Fusic will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Fusic Co. provides mocks as virtual IoT devices. You can customize mocks, and get any amount of data at any time in your test. For more information, visit https://fusic.co.jp/english/.
SYS-CON Events announced today that Keisoku Research Consultant Co. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Keisoku Research Consultant, Co. offers research and consulting in a wide range of civil engineering-related fields from information construction to preservation of cultural properties. For more information, vi...
SYS-CON Events announced today that MIRAI Inc. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. MIRAI Inc. are IT consultants from the public sector whose mission is to solve social issues by technology and innovation and to create a meaningful future for people.
SYS-CON Events announced today that Interface Corporation will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Interface Corporation is a company developing, manufacturing and marketing high quality and wide variety of industrial computers and interface modules such as PCIs and PCI express. For more information, visit http://www.i...
SYS-CON Events announced today that Ryobi Systems will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Ryobi Systems Co., Ltd., as an information service company, specialized in business support for local governments and medical industry. We are challenging to achive the precision farming with AI. For more information, visit http:...
SYS-CON Events announced today that Enroute Lab will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Enroute Lab is an industrial design, research and development company of unmanned robotic vehicle system. For more information, please visit http://elab.co.jp/.
Elon Musk is among the notable industry figures who worries about the power of AI to destroy rather than help society. Mark Zuckerberg, on the other hand, embraces all that is going on. AI is most powerful when deployed across the vast networks being built for Internets of Things in the manufacturing, transportation and logistics, retail, healthcare, government and other sectors. Is AI transforming IoT for the good or the bad? Do we need to worry about its potential destructive power? Or will we...
SYS-CON Events announced today that Nihon Micron will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Nihon Micron Co., Ltd. strives for technological innovation to establish high-density, high-precision processing technology for providing printed circuit board and metal mount RFID tags used for communication devices. For more inf...
SYS-CON Events announced today that mruby Forum will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. mruby is the lightweight implementation of the Ruby language. We introduce mruby and the mruby IoT framework that enhances development productivity. For more information, visit http://forum.mruby.org/.
In his session at @ThingsExpo, Greg Gorman is the Director, IoT Developer Ecosystem, Watson IoT, will provide a short tutorial on Node-RED, a Node.js-based programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. It provides a browser-based editor that makes it easy to wire together flows using a wide range of nodes in the palette that can be deployed to its runtime in a single-click. There is a large library of contributed nodes that help so...
DevOps at Cloud Expo – being held October 31 - November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's largest enterprises – and delivering real r...
While some developers care passionately about how data centers and clouds are architected, for most, it is only the end result that matters. To the majority of companies, technology exists to solve a business problem, and only delivers value when it is solving that problem. 2017 brings the mainstream adoption of containers for production workloads. In his session at 21st Cloud Expo, Ben McCormack, VP of Operations at Evernote, will discuss how data centers of the future will be managed, how th...
SYS-CON Events announced today that Massive Networks, that helps your business operate seamlessly with fast, reliable, and secure internet and network solutions, has been named "Exhibitor" of SYS-CON's 21st International Cloud Expo ®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. As a premier telecommunications provider, Massive Networks is headquartered out of Louisville, Colorado. With years of experience under their belt, their team of...
SYS-CON Events announced today that Mobile Create USA will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Mobile Create USA Inc. is an MVNO-based business model that uses portable communication devices and cellular-based infrastructure in the development, sales, operation and mobile communications systems incorporating GPS capabi...
SYS-CON Events announced today that TMC has been named “Media Sponsor” of SYS-CON's 21st International Cloud Expo and Big Data at Cloud Expo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Global buyers rely on TMC’s content-driven marketplaces to make purchase decisions and navigate markets. Learn how we can help you reach your marketing goals.
There is huge complexity in implementing a successful digital business that requires efficient on-premise and cloud back-end infrastructure, IT and Internet of Things (IoT) data, analytics, Machine Learning, Artificial Intelligence (AI) and Digital Applications. In the data center alone, there are physical and virtual infrastructures, multiple operating systems, multiple applications and new and emerging business and technological paradigms such as cloud computing and XaaS. And then there are pe...
Real IoT production deployments running at scale are collecting sensor data from hundreds / thousands / millions of devices. The goal is to take business-critical actions on the real-time data and find insights from stored datasets. In his session at @ThingsExpo, John Walicki, Watson IoT Developer Advocate at IBM Cloud, will provide a fast-paced developer journey that follows the IoT sensor data from generation, to edge gateway, to edge analytics, to encryption, to the IBM Bluemix cloud, to Wa...
With major technology companies and startups seriously embracing Cloud strategies, now is the perfect time to attend 21st Cloud Expo October 31 - November 2, 2017, at the Santa Clara Convention Center, CA, and June 12-14, 2018, at the Javits Center in New York City, NY, and learn what is going on, contribute to the discussions, and ensure that your enterprise is on the right path to Digital Transformation.
SYS-CON Events announced today that App2Cloud will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct. 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. App2Cloud is an online Platform, specializing in migrating legacy applications to any Cloud Providers (AWS, Azure, Google Cloud).